Fisher & Paykel Dishwasher Repair Near You — All Brands Serviced

That independence is useful for owners and demanding for diagnosis. The technician treats each drawer as a separate machine.

The lid seal and lift

When the cycle starts, a motorised lid lowers onto the drawer to seal it. The seal and its lift mechanism are the source of most DishDrawer leaks, particularly when an item sticks up and stops the lid from closing flat.

Water can then escape over the edge and into the cabinet below. The technician checks the seal, the lift and the loading before moving on.

Owners sometimes notice the lid seal looking stretched or out of its channel. A seal that has lifted from its groove is a common cause of slow leaks and is replaced as a single part.

Draining and washing per drawer

Each drawer has its own drain pump and check valve, so standing water in one drawer points to that drawer's drain path. A weak wash in one drawer points to that drawer's motor or filter.

If neither drawer fills, the fault is more likely upstream at the household supply or the shut-off under the sink than in either drawer.

Water and detergent

Many homes around Boston get soft reservoir water, which means a smaller detergent dose in each drawer is usually enough. Heavy dosing can leave film on glasses and residue on the lid seal.

In outer towns on well water, adjusting for hardness and keeping rinse aid filled helps prevent scale.