- Coverage120 ZIP codes · 4 counties
- HoursOpen 24/7
At a glance
- Typical time on site
- 1–2 hours
- ZIP codes covered
- 120
- Service areas
- 35
Platforms
Manufacturers we service
Underneath the Maytag badge sits the same family architecture as Whirlpool, with draining handled by its own pump. When a Maytag finishes a wash and leaves a puddle behind, the cost of putting it right is normally modest.
Service request
Or call (857) 491-4488.
Request a repair
Step 1 of 2- The job
- Your details
Other makes
Other dishwasher brands
- SamsungDishwasher
- LGDishwasher
- WhirlpoolDishwasher
- GE AppliancesDishwasher
- MaytagDishwasher
- BoschDishwasher
- KitchenAidDishwasher
- FrigidaireDishwasher
- VikingDishwasher
- KenmoreDishwasher
- AmanaDishwasher
- ElectroluxDishwasher
- MieleDishwasher
- ThermadorDishwasher
- AdmiralDishwasher
- ASKODishwasher
- BertazzoniDishwasher
- BlombergDishwasher
- DacorDishwasher
- Fisher & PaykelDishwasher
- GaggenauDishwasher
- HobartDishwasher
- HotpointDishwasher
- JennAirDishwasher
- RoperDishwasher
- SmegDishwasher
- Thor KitchenDishwasher
Maytag Dishwasher · Greater Boston
Maytag Dishwasher repair across Greater Boston
Many older Maytag machines also carry a hard-food disposer with a chopper blade, and a lot of the noise complaints we attend start there.
A noise worth listening to
A rhythmic grinding at the start of a drain suggests something hard, such as a fruit stone or a sliver of glass, caught against the chopper. A high-pitched whine that stops when the pump stops points toward pump bearings instead.
Our technician pulls the lower arm and filter assembly to look before deciding, because clearing debris is sometimes the entire job.
When the door will not engage
Maytag's latch and lock assembly wears with daily slamming, and a latch that no longer seats tells the controls the door is open. Nothing starts, even though the panel lights.
The latch is a single component that is replaced in place, with no need to remove the machine from under the counter.
If the latch has been replaced before and fails again quickly, the technician also checks door alignment and the hinge springs, because a door that drops unevenly strains the new latch every time it is shut.
Dosing to the local tap
Metro Boston's reservoir water is soft, which means the standard pod dose can be more than the machine needs. Too much detergent on soft water leaves a haze that owners mistake for poor washing.
Well water in outer towns brings the opposite problem, with scale on the inlet valve screen and white spots on glassware. We look at the supply before we look at the parts.
Questions
FAQ — Maytag Dishwasher repair
Can't see yours? Just ask us.
Is a slow-draining Maytag always a bad pump?
No. The check valve, the drain hose and the sink connection cause many of the cases, and the filter is the first thing to rinse yourself.
Why is my Maytag leaving a white film?
On soft water, excess detergent is a likely cause; on well water, minerals are. The fix differs completely, so the supply is checked first.
Do you service Maytag machines under the counter?
Yes. Pumps, latches and valves are reached from the front or by sliding the unit forward, and the technician names the failed part before quoting.
Specification
Maytag Dishwasher repair — the numbers
- 1–2 hours
- Typical time on site
- 120
- ZIP codes covered
- 90-Day
- Parts warranty
