Amana Washer Repair Near You — All Brands Serviced

It also means the washer can be tested directly with a meter instead of being decoded through a screen of vague symptoms. Diagnosis is usually short, and so is the bill.

When the washer will not fill

An Amana that sits silent with no water arriving could have a closed tap, low supply pressure, a clogged inlet screen, a scaled valve or a faulty level sensor. The machine cannot tell these apart, and neither can a quick look over the back.

Check both taps are fully open and the hoses are not kinked against the wall. If water still does not arrive, the valve and the level sensor are tested in turn.

The familiar failure order

On the shared top-load design, the drive coupler, lid switch and drain pump fail in a well-known sequence. We follow it, and it often identifies the fault before the cabinet is even opened.

A grinding sound with no agitation usually means the coupler has worn through. A cycle that fills and washes but stops before spinning often points to the lid switch.

Knowing when to stop

Because Amana washers are inexpensive to buy, the point where replacement makes more sense arrives sooner than on premium machines. We give an honest view when a major repair is not worthwhile.

A switch, valve or pump is almost always worth fixing. A failed transmission on an elderly unit may not be, and we would rather tell you than sell you the repair.